Hardware > Firebee
Atari Coldfire Project Reloaded
joska:
--- Zitat von: Atari060 am Di 12.04.2011, 16:31:08 ---Dass derzeit nicht gedruckt werden kann, weil NVDI gar nicht läuft halte ich für eines der größten Probleme überhaupt... vor allem in Hinblick auf Neueinsteiger... ich meine Milan und Hades konnten wenigstens NVDI nutzen, ob das bei dem heutigen Druckerangebot noch sooo hilfreich ist sei mal dahingestellt...
--- Ende Zitat ---
Well, it's not that long ago the Firebee didn't even exist. Now I can boot MiNT/XaAES and run GEM-apps. A lot of problems has been solved, and the printing/VDI-problem has not been adressed until now. I'm confident that a good solution will be found.
--- Zitat von: Atari060 am Di 12.04.2011, 16:31:08 --- eine Lösung in Richtung "CUPS" zumindest für MiNT wird aber wohl unumgänglich sein, da es sehr schwer sein wird Treibertechnisch am Ball zu bleiben, dafür fehlen einfach die Leute... es sei denn man fände einen weg CUPS Treiber in xVDI Treiber umzuwandeln...
--- Ende Zitat ---
I don't think CUPS is a good solution. It's simply too heavy. I think the future is PS or PCL and network printing. This will allow printing to almost all current consumer printers with a single driver.
Arthur:
Ich denke mal... in der Hardware der Firebee steckt großes Potential. Wie viel man später damit machen kann das kann wohl niemand voraus sagen. Ich kann mir aber durchaus vorstellen das die Firebee dank ihrer Flexibilität und den vielen Schnittstellen sowie dem PCI-Bus viele zum programmieren anregen wird. Eine Dokumentation der Hardware, insofern sie sich vom Atari unterscheiden, ist bestimmt auch noch wichtig. Der verbreitungsgrad ist natürlich auch ein Faktor der dabei eine große Rolle spielt und wichtig ist auch das die Firebee möglichst alle grundlegenden Funktionen zum Arbeiten mitbringt. Das es schon Compiler für die Firebee gibt ist auch ein großes Plus.
Ich glaube zwar das viele sich schon auf ihre Firebee freuen wie bekloppt, ;D doch glaube nicht das jemand so blauäugig ist zu denken sofort sämtliche Dinge damit zu erledigen. In 2-4 Jahren könnte ich es mir aber durchaus vorstellen.
michschmi:
--- Zitat von: joska am Mi 13.04.2011, 10:43:18 ---
--- Zitat von: Atari060 am Di 12.04.2011, 16:31:08 ---Dass derzeit nicht gedruckt werden kann, weil NVDI gar nicht läuft halte ich für eines der größten Probleme überhaupt... vor allem in Hinblick auf Neueinsteiger... ich meine Milan und Hades konnten wenigstens NVDI nutzen, ob das bei dem heutigen Druckerangebot noch sooo hilfreich ist sei mal dahingestellt...
--- Ende Zitat ---
Well, it's not that long ago the Firebee didn't even exist. Now I can boot MiNT/XaAES and run GEM-apps. A lot of problems has been solved, and the printing/VDI-problem has not been adressed until now. I'm confident that a good solution will be found.
--- Zitat von: Atari060 am Di 12.04.2011, 16:31:08 --- eine Lösung in Richtung "CUPS" zumindest für MiNT wird aber wohl unumgänglich sein, da es sehr schwer sein wird Treibertechnisch am Ball zu bleiben, dafür fehlen einfach die Leute... es sei denn man fände einen weg CUPS Treiber in xVDI Treiber umzuwandeln...
--- Ende Zitat ---
I don't think CUPS is a good solution. It's simply too heavy. I think the future is PS or PCL and network printing. This will allow printing to almost all current consumer printers with a single driver.
--- Ende Zitat ---
Topic 1: Perhaps that's because the "normal" Atari-User has to "fight" with printing every day, if one uses modern hardware. So one doesn't think this would be an issue that's not "on the to-do-list"; even when there are about three different "standrards" to print anything with programs (the old driver based way in every programm individually, the way of printing via gdos with program-built-in printer-dialogue and the way of printing via gdos without program-built-in printer-dialogue). There is not really a standard obivious, the individual-printer-driver way is compoletely obsolete and the way via gdos fails on atari-machine/clones prior coldfire because the printer-drivers-provided are far too old. Here you only have a chance if you find a driver that still wokrs in any way with your printer
Topic 2: Do you realy think PS/PCL is the solution. I'm asking because it's my experience that printers in the low-budget cathegory seldom have biult-in printer-languages. They are directed via software-based drivers which means you have to install a more or less big software-package to make them printing and these drivers exist for win mac and in vew cases for linux . PCL mostly ist built-in in printers that cost 200€ and up.
Ok, it's just my 2 cents top the topic and I may be completely wrong
Nervengift:
--- Zitat ---Ich glaube zwar das viele sich schon auf ihre Firebee freuen wie bekloppt, ;D doch glaube nicht das jemand so blauäugig ist zu denken sofort sämtliche Dinge damit zu erledigen. In 2-4 Jahren könnte ich es mir aber durchaus vorstellen.
--- Ende Zitat ---
Ich bin da letzten Endes eher skeptisch. Viele - wie ich auch - nutzen heute z. B. Mobile Devices und dann geht's oft darum Termine, Mails und Adressbücher zu synchronisieren. Ich wüßte z. B. nicht, daß es ein Emailprogramm für GEM gibt, was IMAP unterstützt. Hier greift auch wieder die Sicherheitsfrage. Wie kann ich auf einen Atari solche Daten effektiv schützen? Dann sind solche Anwendungen wie Skype heutzutage nicht unwichtig. Im Netz funktioniert vieles über Java Script und Flash. Alles Dinge, die es so erstmal nicht gibt für die Firebee. Ich bin gespannt ob sich das ändern wird. Das wäre echt toll. 8) Wenn nicht, dann könnte ich aber auch mit leben, was heute Stand der Dinge ist. OS X wäre dann aber sehr wahrscheinlich noch immer mein Hauptsystem. :o
Andreas
joska:
--- Zitat von: michschmi am Mi 13.04.2011, 11:41:25 ---So one doesn't think this would be an issue that's not "on the to-do-list"; even when there are about three different "standrards" to print anything with programs (the old driver based way in every programm individually, the way of printing via gdos with program-built-in printer-dialogue and the way of printing via gdos without program-built-in printer-dialogue). There is not really a standard obivious, the individual-printer-driver way is compoletely obsolete and the way via gdos fails on atari-machine/clones prior coldfire because the printer-drivers-provided are far too old. Here you only have a chance if you find a driver that still wokrs in any way with your printer
--- Ende Zitat ---
First of all, the problem with printing on the Firebee now is that there isn't a GDOS for it yet. But as you say, that is only a part of the problem. Even with NVDI 5 printing is a pain because there hasn't been a new driver for 12 years or so. And there won't be any either. I have NVDI 5.03 on my Milan and the only way to print something is to use the Laserjet driver, print to file and then dump the printfile to the HP-printer connected to my wife's PC.
--- Zitat von: michschmi am Mi 13.04.2011, 11:41:25 ---Topic 2: Do you realy think PS/PCL is the solution. I'm asking because it's my experience that printers in the low-budget cathegory seldom have biult-in printer-languages. They are directed via software-based drivers which means you have to install a more or less big software-package to make them printing and these drivers exist for win mac and in vew cases for linux . PCL mostly ist built-in in printers that cost 200€ and up.
--- Ende Zitat ---
Yes, PS (or PCL) is a good solution in combination with network printing. When printing via lp/lpd (which CUPS also use btw) the printserver takes care of PS->printer if necessary. But most printers understand PCL or PS directly, even the cheap ones.
The alternative is to support all sorts of printers with printerdrivers on the Atari. I don't think that's realistic. That was a problem even 15 years ago.
Navigation
[0] Themen-Index
[#] Nächste Seite
[*] Vorherige Sete
Zur normalen Ansicht wechseln