Software > Software (16-/32-Bit)
100 EasyMiNT Fragen
frank.lukas:
Hallo informant,
das mit CD Rom unter MiNT hatten wir schonmal ... . Lese mal die SPIN Anleitung genau durch. Da gibt es ein METAXBS.PRG.
Beim Thema Desktop sowie Shelllogin schau mir mal die /etc/ttytab Datei an.
grüße
Frank
guest1927:
Danke Danke für die Hinweise. Und ich senke mein Haupt in Ehrfurcht, daß ich fälschlicherweise EysyMINT-Fragen geschrieben habe. ;) Ich wollte daß alle einen Plan haben was ich da installiert habe.
Tja das mit dem AES werde ich noch angehen. Und mit dem VDI steht noch ein riesiger Brocken vor mir, ...
Aber mal ganz Off-Topic: Mit Atari hat das nicht mehr viel zu tun, ... der Rechner braucht 65 Sekunden zum booten und dauernd muß ich in irgendwelchen Textfiles kryptischen Dinge schreiben, ... Und die Unix-Dateistruktur ist ja das schrägste schlechthin. Gibt´s da eigentlich eine Logik dahinter?
frank.lukas:
Hier mal meine XAAES.CNF zum Anschauen ...
####################################################################
# XAAES.CNF created by EasyMiNT
# This is only a rudiment CNF file, just that things come up!
# It's highly recommended to have a look at the original CNF file!!
# There are much more options and explanations!
# You will find it under c:\MINT\1-16-CUR\XAAES\EXAMPLE.CNF
####################################################################
# Environment variables
setenv ACCPATH c:\
setenv ACCEXT ACC,ACX
setenv GEMEXT PRG,APP,GTP,OVL,SYS
setenv TOSEXT TOS,TTP
setenv TOSRUN u:\opt\toswin2\tw-call.prg
setenv SDL_VIDEODRIVER gem
# naes_cookie (default is no)
naes_cookie = no
# use $HOME in shell_find
usehome = yes
#####################################################################
# dc_time = <time in ms> (default is 50)
#
# double click time (ms)
#
dc_time = 100
#####################################################################
# mp_timegap = <time in ms> (default is 3)
#
# Mouse packet time-gap. This is the time (in 200hz timer ticks) that
# must pass after a button-release event before a new button-press
# event is accepted by moose.adi. Because of unstable mouse-buttons,
# a button-press may follow immediately after a button-release, creating
# and "extra" mouse-click. This is especially annoying when releasing
# the right-button after a drag-session (Thing's directory-window, for
# example), and the "extra-click" fires some unwanted action.
#
mp_timegap = 3
#####################################################################
# lrmb_swap = <bool> (default is 'no')
#
# Swap left and right mouse buttons. Setting 'lrmb_swap = yes' will make
# XaAES swap the left and right mouse buttons.
#
lrmb_swap = no
#####################################################################
# Mouse wheel configuration.
#
# There are currently four configuration variables that is used to to set
# wheel configuration;
#
# vertical_wheel_id = <value> (default is 0)
# vertical_wheel_amount = <value> (default = 1)
# horizontal_wheel_id = <value> (default is 1)
# horizontal_wheel_amount <value> (default is 1)
#
# With 'vertical_wheel_id' you can choose which wheel you want to use as the
# vertical wheel. Likewise, you set the ID of the wheel you want to define as
# the horizontal wheel. Do NOT set the same value for both vertical and
# horizontal wheel ID's.
#
# With vertical_wheel_amount you can set the amount of lines to scroll per
# turn of the vertical wheel. Likewise, you can set the amount of columns to
# to scroll per turn of the horizontal wheel using 'horizontal_wheel_amount'.
# The value for these configuration variables must be a number between
# 1 and 20. Per now, this actually sets the number of WM_ARROWED messages
# send to the application per turn of the wheel.
#
vertical_wheel_id = 0
vertical_wheel_amount = 3
horizontal_wheel_id = 1
horizontal_wheel_amount = 3
#####################################################################
# next_active = <string> (default is window)
next_active = client
# app_options = appname,argument1,argument2,...
# These are good app_options settings that I (ozk) use atm
app_options = default,thinwork=true,winframe_size = 0,xa_nomove = false
app_options = aessys,thinwork=true,winframe_size = 0,xa_nomove = false
app_options = jinnee, naesff = true
app_options = taskbar,inhibit_hide = yes, clwtna = true
app_options = amail, naesff = true
app_options = mymail,thinwork=true,winframe_size = 0
app_options = highwire,winframe_size = 0
# The following will keep the desktop, taskbar and toswin2 running after
# a ctrl-alt-a action
ctlalta_survivors = "toswin2 ", "strngsrv", "_aes_shell_", "taskbar "
clipboard = c:\clipbrd\
accpath = c:\
launcher = u:\opt\toswin2\tw-call.prg
# widgets = <file>
# resource = <file>
#
#resource = xa_mono.rsc
widgets = widgets\gemjwdg.rsc
#widgets = widgets\styl_wdg.rsc
#widgets = widgets\nine-ozk.rsc
#widgets = widgets\baroqwdg.rsc
#widgets = widgets\ronb_wdg.rsc
#widgets = widgets\magicwdg.rsc
#
cancel = cancel,abbruch,annuler,avbryt,anuluj,afbryd,undo
# filters = mask, mask, ...
filters = *.*, *.[atpg]*, *.[chs]*, *.l*, *.o*
#
#helpserver = HYP,ST-GUIDE,d:\help\st-guide.prg
helpserver = HYP,HYP_View,c:\hypview\hyp_view.app
helpserver = HTM,HighWire,c:\highwire\highwire.app
# start any other programs with run
#run <path>\<application>
run u:\opt\toswin2\toswin2.prg
run u:\c\mint\1-16-cur\xaaes\xaaesnap\xaaesnap.prg
# system shell
setenv AVSERVER "DESKTOP "
setenv FONTSELECT "DESKTOP "
#
shell = u:\c\mint\1-16-cur\teradesk\desktop.prg
frank.lukas:
Hier meine MINT.CNF zum schauen ...
#
#CON=u:\d\var\log\console.log
# MINT.CNF erstellt von EasyMiNT Installer am 12.10.2003 um 17:21:48
#
SLICES=2
#
# filesystem cache (kb)
# more memory increases the filesystem speed
CACHE=8192
#
NEWFATFS=E,F,G,H,I,J,P
# enable VFAT (long names) for this drives
# (can be changed in runtime by FSetter too)
# VFAT=D,E
VFAT=E,F,G,H,I,J,P
#
# enable write protection for this drives
# (can be changed in runtime by FSetter too)
# WRITEPROTECT=
#
# completly remove drive B:
HIDE_B=Y
#
# Links zu EasyMiNT
sln d:\bin u:\bin
sln d:\lib u:\lib
sln d:\etc u:\etc
sln d:\home u:\home
sln d:\usr u:\usr
sln d:\tmp u:\tmp
sln d:\var u:\var
sln d:\sbin u:\sbin
sln d:\root u:\root
sln d:\opt u:\opt
sln d:\mnt u:\mnt
sln d:\boot u:\boot
echo
#
# Environment
setenv PCONVERT PATH,HOME,SHELL
setenv UNIXMODE /brUs
setenv PATH u:\bin,u:\usr\bin,u:\usr\sbin,u:\sbin,u:\boot\mint\bin,u:\c\mint\1-16-cur\xaaes
#
#
setenv SLBPATH u:\d\usr\local\lib\slb
#
# Default login variables. Leave them commented out, if you use
# UNIX style login. If you're using plain MultiTOS and want to
# run UNIX shells under TOSWIN, please uncomment it.
setenv LOGNAME root
setenv USER root
setenv HOME /root
setenv SHELL /bin/bash
#
setenv ALERT YES
# Autostartprogramme
# Filesystemcheck (mandatory)
exec u:\c\mint\bin\sh u:\c\mint\bin\fscheck.sh
echo
#
# Timezone (mandatory)
exec u:\sbin\tzinit -l
echo
#
# Additional tools
# Draconis to MiNT-Net gateway
# exec u:\usr\sbin\mgw
# echo
# Gluestik - STiK/STiNG to MiNT-Net gateway
exec u:\usr\sbin\gluestik
# echo
#exec u:\d\opt\fvdi\FVDI.PRG
echo
#
cd u:\
#
INIT=u:\sbin\init
echo Setup complete, now booting system...
echo
frank.lukas:
Hier einmal meine ttytab aus dem Ordner /etc/ttytab
# /etc/ttytab
# Prinzipiell l„uft auf der console ein normaler getty
#
# Es darf nur einer der Eintr„ge aktiv sein!
#
#console "/usr/sbin/getty console" vt52 on secure
#console "/usr/bin/n_aes" tw52 on secure
#console "/usr/bin/execgem" tw52 on secure
console "/usr/bin/xaaes" tw52 on secure
#
# gettys auf den seriellen Schnittstellen
#
# Modems k”nnen damit nicht ordentlich bedient werden, dafr gibt es
# mgetty. gettys werden mit on/off ein- oder ausgeschaltet
#
# ttyS0 "/usr/sbin/getty std.19200" dialup off # Modem1
# ttyS1 "/usr/sbin/getty std.19200" dialup off # Modem2
# ttyS2 "/usr/sbin/getty std.19200" dialup off # Serial1
# ttyS3 "/usr/sbin/getty std.19200" dialup off # Serial2
# ttyS4 "/usr/sbin/getty std.19200" dialup off # Lan
#
# Bei MIDI ist es egal welche Baudrate man einstellt, es wird
# immer nur die einzig m”gliche genommen.
#
# ttyS5 "/usr/sbin/getty std.19200" dialup off # Midi
#
# Beispiel fr den mgetty.
#
# ttySx "/usr/sbin/mgetty -x 6 ttySx" dialup on secure
Navigation
[0] Themen-Index
[#] Nächste Seite
[*] Vorherige Sete
Zur normalen Ansicht wechseln