Software > Alternative Betriebssysteme
Installation von NetBSD
Arthur:
Hallo Thomas,
Für den Atari ST ist NetBSD nicht gedacht. Du wirst schon deinen Falcon dafür nehmen müssen, der ja ein 1,44MB Diskettenlaufwerk haben sollte. Hier ein Auszug aus den ...
"atari System Requirements and Supported Devices"
NetBSD/atari 5.0.1 runs on the TT030, Falcon, Hades and MilanI machines. An FPU is not required. The minimum amount of RAM required is 4 MB. On the Hades, only the Tseng PCI VGA cards (ET4000/ET6000/ET6100) are supported in the 5.0.1 release. When an unsupported video card is present, you can use NetBSD with a serial console only.
A minimal installation requires around 100MB of disk space, plus a swap partition size of 2*RAM (and always greater than 20MB). You will probably want to compile your own kernel, as GENERIC is large and bulky in order to accommodate all people, BOOT is small and might not have all the features you want).
Hier die Auflistung (30.07.2009) der unterstützten Hardware wo ich auf jeden Fall noch die NetUSBee oder Hydra vermisse.
The builtin SCSI host adapter
- Should support most SCSI-drives.
- Should support most tape drives.
- Should support most CD-ROM drives.
- Should support most ZIP/M-O drives.
The builtin video controller
The builtin (720 KB / 1.44 MB) floppy drive
The serial2/modem2 ports
The Falcon FX memory expansion
The Atari mouse
A 3-button mouse (see build description in the FAQ!)
The parallel printer
IDE interface on both Falcon and Hades (includes ATAPI support)
The serial interface on the first 68901 UART (modem1)
VME-bus devices (TT030/Hades)
- BVME410 ethernet
- Circad Leonardo 24-bit VME graphics adapter
- Crazy Dots VME et4000 graphics adapter
- Riebl (and possibly PAM) ethernet cards on the VME bus.
PCI-bus devices (Hades and Milan only)
- ET4000/ET6000/ET6100-PCI (VGA console)
- ESS Technology Inc. Solo-1 Soundcard
- 3Com 3c59x Network card
ISA-bus devices (Hades only)
- Teles S0/16.3-ISA ISDN adapter (with I4B)
This list is incomplete by definition. We can not test all SCSI peripherals, ISA cards or PCI cards. If you have problems with such peripherals, please contact the port-atari@NetBSD.org mailing list.
Getting the NetBSD System on to Useful Media
Arthur:
Würde 10€ spenden um dem NetBSD-Team eine NetUSBee oder Hydra zu spenden. Frank Lukas, liest Du mit und was hältst Du davon?
Gruß Arthur
Beetle:
Ich würde ein EtherNec spenden, wenns hilft. Ohne Net ist NetBSD irgendwie nur BSD ::)
Arthur:
Hallo Beetle, ich sehe das genau so. Ich hab mal an port-atari@NetBSD.org eine Mail geschickt und darauf hingewiesen das Riebl und Pams sehr selten sind und Ethernec, NetUSBee und Hydra alle auf dem selben RTL Chips basieren und weiter verbreitet sind. Mal schauen ob sich wer angesprochen fühlt.
Gruß Arthur
Lukas Frank:
Anfragen wegen der EtherNEC (NetUSBee) Netzwerkkarte einfach an
tsutsui(AT)ceres.dti.ne.jp
schicken. Ich denke aber das er eine Karte zu geschickt haben muss damit das
etwas wird mit der Treiber Unterstützung. Er baut zur Zeit eine SMC_TT auf.
Hallo Athur, teste doch mal bitte den Kernel auf deinem Atari TT ob er läuft.
grüße
frank
Navigation
[0] Themen-Index
[#] Nächste Seite
[*] Vorherige Sete
Zur normalen Ansicht wechseln