Hardware > Hardware (High-End)

DFB1 Atari Falcon 030 Beschleuniger mit Fastram ...

<< < (10/34) > >>

tuxie:

--- Zitat von: badwolf am Do 28.04.2022, 17:13:20 ---
--- Zitat von: tuxie am Do 28.04.2022, 16:28:38 ---Hello,

one question, what about Falcons with Bus Accelerator ? For example with Phantom with 25Mhz Bus. Would it be possible to get it working with boosted Falcons ?

I woule be very interested in one of your Accelerator, but would also have 25Mhz Bus to get higher Resolution.

--- Ende Zitat ---
This speeder what Steven has, is from me... i could give you one.. Steven could support you :)

Hi Tuxie,

I don't have a bus speeder, but Steve over at the Exxos Forums has been building a board and his Falcon has one.

He's had mixed results so far. BadMood doesn't work (the screen refresh is wrong), but general desktop use and PM-Doom are fine.

https://www.exxoshost.co.uk/forum/viewtopic.php?f=18&t=5303&start=50#p83711

His initial problems were because his FPU was only half-working at 25MHz (similar to one of mine).

He's taking a break now, but we'll be looking into any realistically-soluble issues he comes up with when he has a chance to start testing again.

Perhaps drop a message on his thread there?

BW

--- Ende Zitat ---

Lukas Frank:
Mal ein Gembench lauft mit Fastram über die MACH32 im Vergleich zum Atari ST ...

Lukas Frank:
Bis jetzt schaffe ich es nicht neue Firmware zu flashen ...

https://www.exxoshost.co.uk/forum/viewtopic.php?f=29&t=5407

Lukas Frank:
Jetzt funktioniert es ...

Das VREF rote Kabel war kaputt, es hatte keine Verbindung von einem Ende zum anderen. Darauf kommt doch keiner!

Lukas Frank:
Mit xc3sprog geht gar nichts mit dem Xilinx DLC9LC USB Cable. Mit der Xilinx Suite geht es ...

Navigation

[0] Themen-Index

[#] Nächste Seite

[*] Vorherige Sete