Hardware > Firebee

Firebee Fehler ...

<< < (6/13) > >>

Lukas Frank:
Tera Term ist wunderbar, recht vielen Dank.

Ich hatte Realterm, das war aber nichts ...

1ST1:
Putty ist total easy.

Lukas Frank:
ssh und telnet client hat mich etwas abgeschreckt ...

1ST1:
Du kannst in Putty die Kommunikation auch auf COM-Port umstellen, guck mal genau hin.

Lukas Frank:
So jetzt sollte alles richtig sein. Die Firebee funktionierte die ganze Zeit einwandfrei bis auf heute Abend ...

Das ist der Fehler ...


Der Dump über die serielle Schnittstelle ist aber normal so wie es aussieht ohne Fehler. Trotzdem bekomme ich das Fehlerbild mit diesem Farbmuster auf dem Bildschirm ...

--- Code: ---SERIAL OK!
SLT OK!
FBCS OK!
DDRAM OK!
FPGA OK!
PLL SET!
DVI OK!
SD-Card SDHC SMI    1GB OK!
Uncompress PCI drivers from 0x00EA0008 (size 0x000380C7) to 0x01000000 (size 0x0007D3BC)
Init MMU
MMU OK
CF68K emulation started

Scanning PCI devices...
-----------------------------------------------------------------------
 Bus | Slot | Fctn | VendorID | DeviceID | Description
-----------------------------------------------------------------------
 [0] |  [0] |  [0] |  0x1057  |  0x5806  | Bridge Controller
 [0] |  [1] |  [0] |  0x1033  |  0x0035  | Serial Bus
 [0] |  [1] |  [1] |  0x1033  |  0x0035  | Serial Bus
 [0] |  [1] |  [2] |  0x1033  |  0x00E0  | Serial Bus
 [0] |  [1] |  [3] |  0xFFFF  |          | no device
 [0] |  [2] |  [0] |  0xFFFF  |          | no device
 [0] |  [3] |  [0] |  0xFFFF  |          | no device
 [0] |  [4] |  [0] |  0xFFFF  |          | no device
 [0] |  [5] |  [0] |  0xFFFF  |          | no device
 [0] |  [6] |  [0] |  0xFFFF  |          | no device
 [0] |  [7] |  [0] |  0xFFFF  |          | no device
 [0] |  [8] |  [0] |  0xFFFF  |          | no device
 [0] |  [9] |  [0] |  0xFFFF  |          | no device
 [0] | [10] |  [0] |  0xFFFF  |          | no device
 [0] | [11] |  [0] |  0xFFFF  |          | no device
 [0] | [12] |  [0] |  0xFFFF  |          | no device
 [0] | [13] |  [0] |  0xFFFF  |          | no device
 [0] | [14] |  [0] |  0xFFFF  |          | no device
 [0] | [15] |  [0] |  0xFFFF  |          | no device
USB: EHCI usb-uPD720101, regs address 0xA0002000, PCI handle 0x20001
Scanning bus for devices... 1 USB Device(s) found
USB: OHCI usb-uPD720101-0, regs address 0xA0000000, PCI handle 0x1
Scanning bus for devices... 1 USB Device(s) found
USB: OHCI usb-uPD720101-1, regs address 0xA0001000, PCI handle 0x10001
Scanning bus for devices... 1 USB Device(s) found
init_videl TFP410 OK
Setscreen mode 0x003B 640x480-8@60
init_videl search in videl list 640x480x8@60Hz on DFP
init_videl PLL detected
init_videl found in modedb list 640x480x8 with clock 25MHz
init_videl 640x480x8@60Hz 25MHz HSYNC:LOW VSYNC:LOW
 HHT:320 HBB:2B0 HBE:02F HDB:030 HDE:2AF HSS:2C0
 VFT:20D VBB:201 VBE:020 VDB:021 VDE:200 VSS:20B
 ADDR:60000000 VWRAP:0140 VCTRL:000 VCO:182
 ACP_VIDEO_CONTROL:01078213 (01078213)
ERROR: OHCI usb-uPD720101-0 CTL:TIMEOUT
ERROR: OHCI usb-uPD720101-1 CTL:TIMEOUT
CODEC SYNC frequency: 48493 Hz
filename from default: /home/firetos.hex
host IP from flash params: 192.168.2.1
Pure C info at 0x1938500 to 0x197f1f8 \AUTO\NVDI.PRG
Pure C info at 0x193a376: a000 0000                 mac.w d0.l,d0.l,acc0
Pure C info at 0x193a96e: 1e1f                      move.b (sp)+,d7
Pure C  fix at 0x19459dc: 1f01                      move.b d1,-(sp) -> 0xa911
Pure C  fix at 0x1945b78: 1f01                      move.b d1,-(sp) -> 0xa911
Pure C  fix at 0x194782a: 1f00                      move.b d0,-(sp) -> 0xa910
Pure C  fix at 0x1947848: 1f00                      move.b d0,-(sp) -> 0xa910
Pure C  fix at 0x1948632: 1f00                      move.b d0,-(sp) -> 0xa910
Pure C info at 0x196c406: a002 24a8                 mac.w d2.l,d0.u>>,acc0
Pure C info at 0x196c422: a001 4fef                 msac.l d1,d0,acc0
Pure C info at 0x196c450: 1f00                      move.b d0,-(sp)
Pure C info at 0x196c460: 1f00                      move.b d0,-(sp)
Pure C info at 0x196c472: 1f02                      move.b d2,-(sp)
Pure C  fix at 0x196ff3a: 4c00 1c00                 muls.l d0,d0:d1 -> 0xabc0
Pure C  fix at 0x196ff3e: 4c42 1c00                 divs.l d2,d0:d1 -> 0xafc2
Pure C  fix at 0x196ff96: 4c00 1c02                 muls.l d0,d2:d1 -> 0xabc0
Pure C  fix at 0x197001a: 4c40 2c01                 divs.l d0,d1:d2 -> 0xafc0
Pure C info at 0x197061e: 1e1f                      move.b (sp)+,d7
Pure C info at 0x197071e: 1e1f                      move.b (sp)+,d7
Pure C info at 0x197151a: 1f12                      move.b (a2),-(sp)
Pure C  fix at 0x19753c2: 4c00 1c00                 muls.l d0,d0:d1 -> 0xabc0
Pure C  fix at 0x19753c6: 4c42 1c00                 divs.l d2,d0:d1 -> 0xafc2
Pure C info at 0x197c686: a006 4e75                 mac.l d6,d0,acc2
Pure C info at 0x197c692: a007 2c5f                 mac.l d7,d0>>,acc2
Pure C info at 0x197d2a2: a000 7000                 mac.w d0.l,d0.l,acc0
Line A opcode 0xA920 at 0x0193854C
Line A opcode 0xA920 at 0x019A0650
Pure C info at 0x19d21f0 to 0x19d6e1c CT60TEMP.ACC
Pure C info at 0x19d53aa: a000 0000                 mac.w d0.l,d0.l,acc0
Pure C info at 0x19d6454: a000 0000                 mac.w d0.l,d0.l,acc0
Pure C info at 0x19d8810 to 0x19e122a COPS.ACC
Pure C info at 0x19de53e: a000 225f                 mac.w d0.u,d0.l<<,acc2
Pure C info at 0x19dfd70: 1e1f                      move.b (sp)+,d7
Setscreen mode 0x2E3B 1600x1200-8@60
init_videl search in videl list 1600x1200x8@60Hz on DFP
init_videl PLL detected
init_videl found in modedb list 1600x1200x8 with clock 162MHz
init_videl 1600x1200x8@60Hz 162MHz HSYNC:HIGH VSYNC:HIGH
 HHT:870 HBB:770 HBE:12F HDB:130 HDE:76F HSS:7B0
 VFT:4E2 VBB:4DE VBE:02D VDB:02E VDE:4DD VSS:4DF
 ADDR:60000000 VWRAP:0320 VCTRL:000 VCO:1A2
 ACP_VIDEO_CONTROL:01078213 (01078213)

[code]

--- Ende Code ---

Navigation

[0] Themen-Index

[#] Nächste Seite

[*] Vorherige Sete