Important note for the users of BlowUP030 or other screen enhancement software
together with FX:

When the Falcons own 32MHz Pixelclock is used, this only works correct, if no
acceleration is activated. When the Falcon is switched to 36MHz (via the
FX-CPX) this clock is also used for display output. This means that the
values, BlowUP gives you for the horizontal and vertical frequencies are
wrong. To calculate the correct numbers you have to multiply BlowUPs values
by 1.125 (i.e. 36/32). At 40MHz you have to multiply by 1.25 (40/32).

Example: You have the Falcon set to 40MHz system clock and you are using the
internal pixel clock of originally 32MHz. BlowUP tells you that you have
40kHz (vert) and 76Hz (hor). In reality you have 50kHz and 96Hz. If you have
a fixed frequency monitor or an older multiscan monitor you have to pay
attention to this!

Positive side-effect:
In 256 and 65536 colors you can achieve higher refreshrates through the
faster system clock!

