4. USE OF THE INTERFACE Adapter automatically detects the type of the device connected which is signalized by the LED as follows: - LED dimms every 2s. – mouse, - LED dims twice each 2s. – joystick or pad, - LED dims for three times each 2s. – keyboard. If the LED flashed alternately it means, that the device is not connected or it is not supported. MOUSE PC mouse button Function Left Left mouse button Roll (button) Middle mouse button Right Right mouse button KEYBOARD The connected keyboard operates in two modes: - mouse emulation with use of keys, - joystick emulation with use of keys. Attention: Emulation mode for C64 is experimental (some difficulties might occur). Button Function W Move up (both modes) S Move down (both modes) A Move left (both modes) D Ruch w right (both modes) O or < Fire1 or left mouse button in mouse emulation mode P or > Fire2 or right mouse button in mouse emulation mode 9 or K Autofire for Fire 1 button 0 or L Autofire for Fire 2 button 1 Switch to mouse emulation mode (short LED flash) 2 Switch to joystick emulation mode (short LED flash) Once the emulation mode is being chosen it is remembered and set as a default mode at the next startup. MOUSE + KEYBOARD (wireless set) It allows using both devices simultaneously on terms described separately for the mouse and for the keyboard. JOYSTICK / PAD Joysticks and pads operate in modes listed below: - standard joystick for all kinds of computers (Amiga, Atari, C64) - mouse emulation for all kinds of computers (Amiga, Atari, C64) - in CD32 mode (only for Amiga computers), this mode is supported only for games that support this mode. Default configuration : Button (Alternative) Joystick mode Mouse emulation Amiga CD32 games mode 1 (Triangle) Fire 1 Left mouse button Red 2 (Circle) Fire 2 Right mouse button Blue 3 (X) Yellow 4 (Square) Green 5 (L1) << 6 (R1) >> 7 (L2) Autofire for Fire 1 Autofire Red 8 (R2) Autofire for Fire 2 Autofire Blue 9 10 (Select) Start/Pause The alternative buttons description is purely conventional and it might be different from the one present in here. Change in operating mode ( joystick mode / mouse emulation) happens through simultaneous pressing and holding of 9 and 10 buttons on a pad or joystick and further pressing button: - 1 which causes the mouse emulation mode to start, - 2 which causes the joystick mode to start. After pressing the LED will dim and then quickly flash which means that the interface has been configure correctly and you can release all buttons. Attention: those settings are not saved therefore at next computer startup the default mode would be Pad/Joystick. The CD32 mode is automatically detected in joystick mode after a certain game is started. There is an option to re-programme the button settings to adjust the to your needs. To perform it we need press simultaneously pad or joystick buttons as follows: - Button 1 + Button 2 + left direction and hold it for 10s (LED starts flashing quickly) now we have 15s. to programme the buttons of a pad by pressing 10 buttons one after another according to our needs.