Hardware > Hardware (Classic 16-/32-Bit)

Hilfe bei Hydra installation

<< < (3/6) > >>

guest1302:
Hello,

I've a working sting config under netusbee.

I'll verify an compare your configuration with mine.

Mark

FrederickMeißner:
Hi Mark!
Thank u so muchly :)

guest1302:
With the Netusbee on my TT, with magic, only the following modules are loaded :

enec3.stx
resolve.stx
tcp.stx
udp.stx

All other modules are renamed to *.sty.
In the past, I did I lot off checking, and found that some modules are incompatible with each other.

Route tab is as follows:

0.0.0.0[Tab]0.0.0.0[tab]EtherNet[tab]192.168.1.1
0.0.0.0[Tab]0.0.0.0[tab]Ethernet0[tab]192.168.1.1

I don't know any more which item is the working in my route.tab

Mark

guest1302:
Beware of the capitals in the rout.tab file. !

guest1302:
A useful link

http://hardware.atari.org/manuals/netsoft.htm

http://hardware.atari.org/software/soft.htm

http://hardware.atari.org/manuals/netsting.htm

If it works, write some kind word to the author, the initial maker of the netusbee. I found his explanation very good.

==================
Update 01
==================
ZCONTROL issue :

http://www.atari-forum.com/viewtopic.php?f=14&t=11288&hilit=sting

Don't use ZCONTROL, but XCONTROL or COPS.

Mark

Navigation

[0] Themen-Index

[#] Nächste Seite

[*] Vorherige Sete