Autor Thema: Raven060 - Aufbau-Abenteuer  (Gelesen 8820 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

Offline Anders Granlund

  • Benutzer
  • Beiträge: 6
Re: Raven060 - Aufbau-Abenteuer
« Antwort #180 am: So 18.01.2026, 09:58:26 »
Interessanterweise scheint MagiC das isa_bios.prg nicht zu mögen und läd das einfach nicht.

@Nervengift, I'm following this MagiC testing with great interest!
I recently noticed the issue with isa_bios.prg too but I wrongly assumed it must be related to my local work-in-progress version.

Great that you mentioned the version on Github is also not working correctly, should make it easier to find which recent(?) change broke it :)

« Letzte Änderung: So 18.01.2026, 09:59:04 von Anders Granlund »

Offline Nervengift

  • Benutzer
  • Beiträge: 1.647
Re: Raven060 - Aufbau-Abenteuer
« Antwort #181 am: Gestern um 19:31:11 »
@Anders Granlund perhaps it is not a big deal that isa_bios.prg is not working under MagiC. After loading the MagiC Booter the network card driver is loaded from gemsys\magic\xtension. After that all programms from the auto folder are executed. Usually I would place isa_bios.prg in the auto folder after the MagiC Booter, rvnova.prg and nvidi.prg. But could that be an issue if the network card driver is loaded before the ISA P'n'P cards are configurated by isa_bios.prg under MagiC? So I think it does not make a lot of sense to place isa_bios.prg after the MagiC Booter in the auto folder because the network card driver is loaded first?

Currently my using the software release of October 7th, 2025. I hope, I will update the rom and software soon.
520 ST(M) (TOS 1.02), Falcon030 (16 MHz, 16 MB RAM, CF-Karte, MiNT & MyAES), Milan040 (25 MHz, 48 MB RAM, EasyMiNT 1.90), Firebee (2nd Edition), PowerMac G5 Late 2005 (2 x 2,3 GHz, Mac OS 10.5), iMac 4K Late 2015 (intel Core i7 4 x 3,3 GHz, Mac OS 10.11.6), IBM XT SFD (640 KB RAM, DR DOS 6.0), Compaq LTE 5300 (Pentium/133 MHz, DR-DOS 7.03), AT-PC (Cyrix 6x86L/200 MHz, Windows 98 SE/MS-DOS 6.22 & Windows 3.11)