Hardware > Hardware (Classic 16-/32-Bit)

Nova VME Bus Grafikkarten Adapter Projekt ...

<< < (27/55) > >>

Bikerbob:
Ok, working on this.. and using your VESA TIMING SIGNAL LINK - thanks Frank.. like that. but I have a question in regards to using VMG .. not sure what I Should or should not modify.

looking at this pic. I am trying to setup 1280x960 x2 as per TT030 high res.   As you can see in the pic.. I do get a picture.. but its nasty and the bottom quarter is messed up. Now  there is the section where you can input I assume the monitor frequencies.. you can see I put my monitor maxes in.. do I do that?  81 HORZ and 75 Vert.  I dont understand how to calculate pixel timing.. I see on VESA SIGNAL site http://tinyvga.com/vga-timing/1280x960@60Hz  that timing is 102.1  my screen says 100 
The horizontal and vertial totals match..
How do I improve this screen?
This is using your STA_VDI.BIB frank

Lukas Frank:
Set first under "Frequencies:" the "Pixel Clock" to your max = 110Mhz and "Save Parameters" ...

When you use a modern LCD or TFT all Resolution can have Vertical Frequenz = 60Hz that is fine. The BIB Files are all fine. Your Monitor have a moiré at the high 1280 resolution, try 1024 and that would be fine.

Lukas Frank:
GALs in DIL werden rar. Habe mir einen PLCC Adapter gemacht.

guest522:

--- Zitat von: Lukas Frank am So 26.07.2020, 18:13:15 ---GALs in DIL werden rar. Habe mir einen PLCC Adapter gemacht.

--- Ende Zitat ---
Kann ich nicht bestätigen. Ich habe  gerade
20 x 16V8
20 x 20V8
20 x 22V10
für insgesamt ca. €40 inkl. Versand aus China erhalten. Nur einer war defekt, was mich überrascht hat.

Lukas Frank:
Ja stimmt ...

Die PLCC waren neu von Kessler

Navigation

[0] Themen-Index

[#] Nächste Seite

[*] Vorherige Sete